Your Source for Racing Engines & Performance Packages

CC Performance Parts, LLC

St. Helens, Oregon • (877) 519-7631

Nasty Performance Products

NastyPerformance custom fuel systems
complete kits to keep up with your HP needs.
98-02 Camaro-Trans Am
NastyPerformance Sumped F-body race fuel tank. Fits in the stock location with stock straps and holds 15 gallons. Includes custom fuel sender has internal baffles to prevent sloshing. Has 1/2" pipe outlets and 1 3/8"pipe return. Pump and filters not included     $665.99
NastyPerformance Fuel tank vent catch can                                                $92.99
RACETRONIX / LONNIES PERFORMANCE Double Pumper kits - - Will support OVER 1000RWHP 98 LS1 F-body Double Pumper - Twin High Output Fuel Pump Kit, Wiring Harness & Hobbs Switch - Fully Assembled & Tested fits in factory fuel tank - Requires your sending unit for modification AND additional fuel system components                                                                                                                            $545.99
RACETRONIX / LONNIES PERFORMANCE Double Pumper kits - - Will support OVER 1000RWHP 99-02 LS1 F-bodyDouble Pumper - Twin High Output Fuel Pump Kit, Wiring Harness & Hobbs Switch - Fully Assembled & Tested fits in factory fuel tank - Requires your sending unit for modification AND additional fuel system components                                                                                                                            $529.99

Stage 1 Street kit-up to 700hp (600rwhp)
Walbro 340 intank fuel pump
Walbro fuel pump install kit
NastyPerformance hotwire kit
NastyPerformance Billet fuel rails
NastyPerformance fuel rail install kit
Ford green top 42# injectors
Nasty Performance Stage 1 Street kit                                                      $739.99
Nasty Performance Stage 1 Street kit with Racetronixs PnP 340pump       $909.99
Nasty Performance Stage 1 Street kit minus injectors                                 $439.99
Stage 2 Street kit-700-800hp (600-700rwhp)
Walbro 340 intank fuel pump
Walbro fuel pump install kit
NastyPerformance hotwire kit
NastyPerformance Billet fuel rails
MagnaFuel billet fuel pressure regulator w/boost ref.
MagnaFuel billet stainless steel fuel filter
Aeroquip -6 braided stainless feed fuel line
Aeroquip fittings and misc parts to complete install
Mototron 60# injectors
Nasty Performance Stage 2 Street kit minus injectors                                $869.99
Nasty Performance Stage 2 Street kit with injectors                                  $1339.99
Nasty Performance Stage 2 Street kit with Racetronixs PnP 340pump       $1459.99
Stage 3 Street kit-1100hp (900-1000rwhp)
2 Walbro 340 intank fuel pump
Walbro fuel pump install kit
NastyPerformance hotwire kit
NastyPerformance Billet fuel rails
MagnaFuel billet fuel pressure regulator w/boost ref.
MagnaFuel billet stainless steel fuel filter
Aeroquip -8 braided stainless feed fuel line
Aeroquip -6 braided stainless return fuel line
Aeroquip fittings and misc parts to complete install
Nasty Performance Stage 3 Street kit 98-02 Walbro pumps Only                $1239.99
Nasty Performance Stage 3 Street kit w/ RACETRONIX / LONNIES PERFORMANCE Double Pumper kits - - Will support OVER 1000RWHP 98-02 LS1 F-body Double Pumper - Twin High Output Fuel Pump Kit, Wiring Harness & Hobbs Switch - Fully Assembled & Tested fits in factory fuel tank - Requires your sending unit for modifications                        $1589.99
Add VersaFueler injector controller and 83# injectors                                   $870.99
Stage 1 Race/Street kit-up to 1000hp (800+rwhp)
NastyPerformance Custom Race fuel tank with gauge sender
NastyPerformance fuel tank vent catch can
MagnaFuel 4302 fuel pump (great for street duty very quiet)we can substitute several other pumps
NastyPerformance Billet fuel rails
MagnaFuel billet fuel pressure regulator w/boost ref.
MagnaFuel billet pre stainless steel fuel filter
MagnaFuel billet post stainless steel fuel filter
Aeroquip -8 braided stainless feed fuel line
Aeroquip -6 braided stainless return fuel line
Aeroquip fittings and misc parts to complete install
NastyPerformance hotwire kit
Nasty Performance Stage 1 Race kit                                                        $2469.99
Add VersaFueler injector controller and 83# injectors                                   $869.99
Stage 2 Race/Street kit-up to 2000hp (1400+rwhp)
NastyPerformance Custom Race fuel tank with gauge sender
NastyPerformance fuel tank vent catch can
MagnaFuel 4303 fuel pump (Great street pump) we can substitute several other pumps
NastyPerformance Billet fuel rails
NastyPerformance Billet Y-block
Fuelabs billet fuel pressure regulator w/boost ref.
Fuelabs billet pre stainless steel fuel filter
Fuelabs billet post stainless steel fuel filter
Aeroquip -10 braided stainless feed fuel line
Aeroquip -8 braided stainless return fuel line
Aeroquip fittings and misc parts to complete install
NastyPerformance hotwire kit
Nasty Performance Stage 2 Race kit                                                        $2689.99
Stage 3 Race kit-over 2000hp
NastyPerformance Custom Race fuel tank with gauge sender
Weldon 2345A fuel pump (Race use only)we can substitute several other pumps
NastyPerformance Billet fuel rails
NastyPerformance Billet Y-block
MagnaFuel billet fuel pressure regulator w/boost ref.
MagnaFuel billet pre stainless steel fuel filter
MagnaFuel billet post stainless steel fuel filter
Aeroquip -12 braided stainless feed fuel line
Aeroquip -8 braided stainless return fuel line
Aeroquip fittings and misc parts to complete install
NastyPerformance hotwire kit
Nasty Performance Stage 3 Race kit                                      Starting at  $2989.99
Nasty Performance Stage 3 Race kit                                      Starting at  $2989.99

Nasty Performance Valve Covers

Need extra room to fit those big roller rockers? Or make that Mod motor finally look like a performance motor? Add a set of these extremely great looking valve covers to top off that high HP motor. We have valve cover to fit all the different LS1-LS2-LS6-LS7-4.8-5.3-6.0L Corvette, GTO, F-Body, Car, Truck whatever motor you have. Even custom to fit NEW ETPerformance heads. Custom made to order
99-07 LS1 LS2 and all ET and aftermarket heads Billet Valve Covers Complete Tall billet valve covers using the factory O-ring gaskets. includes oil cap, breather fittings and coil brackets. All hardware also included            $765.00

99-07 LS1 and LS2 Fabbed Valve Covers fabricated valve covers 2" will clear all after market rockers using the factory O-ring gaskets. All hard ware included                                                                                                                                                                                  Starting at $340.00

97-98 LS1 Fabbed Valve Covers fabricated valve covers 2" will clear all after market rockers using the factory O-ring gaskets. All hard ware included                            Starting at $365.00


99-07 LS1 and LS2 Billet Valve Covers 2" Tall billet valve covers using the factory O-ring gaskets. All hard ware included                    Starting at $455.00
97-98 LS1 Tall Billet Valve Covers 2" Tall billet valve covers using the factory O-ring gaskets. All hard ware included                                                                                                 Starting at $465.00


99-05 LS1 and LS2 Short Billet Valve Covers 1 1/4" Short billet valve covers using the factory O-ring gaskets. All hard ware included                                  Starting at $380.00
97-98 LS1 Short Billet Valve Covers 1 1/4" Short billet valve covers using the factory O-ring gaskets. All hard ware included                                                                                             Starting at $380.00

Billet coil brackets LS1 LS2 LS7 car coils, MSD coils or truck coils have all versions                                                                                                   $190.00
Add Billet Weld on oil cap                                                                                                             $58.00
Add -10 AN breather fitting                                                                                                          $26.00
Add Billet coil brackets LS1,LS2,truck,MSD and more                                                   $193.00
Add Bungs for coil bracket mounts both covers                                                                              $55.00
Add Powder coating all colors                                                                                                       $50.00
Add Engraving to personalize your covers price per pair                                                                 $85.00
Add Custom Engraving to personalize your covers price per pair.                         Initial setup fee $125.00                                      We need a DXF. file of your logo or we can draw it out for you.
NastyPerformance fabbed catch can with K&N breather filter element and petcock drain     $97.50
Billet coil relocate brackets for all style coils                                                                                    $210.00
Billet valve cover spacers including all hadware to complete the install 4 bolt and perimeter bolt available

Need extra room to fit those big roller rockers? Or make that Mod motor finally look like a performance motor? Add a set of these extremely great looking valve covers to top off that high HP motor. We have valve cover to fit all the different LS1-LS2-LS6-LS7-4.8-5.3-6.0L Corvette, GTO, F-Body, Car, Truck whatever motor you have. Even custom to fit NEW ETPerformance heads. Custom made to order
99-07 LS1 LS2 and all ET and aftermarket heads Billet Valve Covers Complete Tall billet valve covers using the factory O-ring gaskets. includes oil cap, breather fittings and coil brackets. All hardware also included            $765.00

99-07 LS1 and LS2 Fabbed Valve Covers fabricated valve covers 2" will clear all after market rockers using the factory O-ring gaskets. All hard ware included                                                                                                                                                                                  Starting at $340.00

97-98 LS1 Fabbed Valve Covers fabricated valve covers 2" will clear all after market rockers using the factory O-ring gaskets. All hard ware included                            Starting at $365.00


99-07 LS1 and LS2 Billet Valve Covers 2" Tall billet valve covers using the factory O-ring gaskets. All hard ware included                    Starting at $455.00
97-98 LS1 Tall Billet Valve Covers 2" Tall billet valve covers using the factory O-ring gaskets. All hard ware included                                                                                                 Starting at $465.00


99-05 LS1 and LS2 Short Billet Valve Covers 1 1/4" Short billet valve covers using the factory O-ring gaskets. All hard ware included                                  Starting at $380.00
97-98 LS1 Short Billet Valve Covers 1 1/4" Short billet valve covers using the factory O-ring gaskets. All hard ware included                                                                                             Starting at $380.00

Billet coil brackets LS1 LS2 LS7 car coils, MSD coils or truck coils have all versions                                                                                                   $190.00
Add Billet Weld on oil cap                                                                                                             $58.00
Add -10 AN breather fitting                                                                                                          $26.00
Add Billet coil brackets LS1,LS2,truck,MSD and more                                                   $193.00
Add Bungs for coil bracket mounts both covers                                                                              $55.00
Add Powder coating all colors                                                                                                       $50.00
Add Engraving to personalize your covers price per pair                                                                 $85.00
Add Custom Engraving to personalize your covers price per pair.                         Initial setup fee $125.00                                      We need a DXF. file of your logo or we can draw it out for you.
NastyPerformance fabbed catch can with K&N breather filter element and petcock drain     $97.50
Billet coil relocate brackets for all style coils                                                                                    $210.00
Billet valve cover spacers including all hadware to complete the install 4 bolt and perimeter bolt available